Pcl emulation – Oki C8800 User Manual
Page 124

Menu functions > 124
PCL
EMULATION
This menu controls settings effective when the printer is
operating in PCL emulation mode.
JAM RECOVERY
ON
OFF
Specifies whether the printer should
perform jam recovery after a paper jam
has occurred. If ON, the printer will
attempt to print again any pages lost
due to a paper jam once the jam has
been cleared.
ERROR REPORT
ON
OFF
If ON, the printer will print error details
when a PostScript Emulation error
occurs.
ITEMS
SETTINGS
EXPLANATION
FONT SOURCE
RESIDENT /
DIMM0 /
DIMM1 /
DOWNLOADED
Specifies the location of the PCL default
font. Normally this will be INTERNAL
unless additional fonts are installed in
the expansion ROM slot or additional
fonts have been downloaded to RAM as
permanent fonts.
FONT No.
I0/ C001 /
S001
Sets the current default font number
from the currently selected source,
which could be internal (I), ROM slot
(C) or downloaded (S).
FONT PITCH
10.00CPI +/-
Sets the pitch in Characters per Inch in
increments of .01CPI
SYMBOL SET
PC-8
PCL symbol set. If the font source and
number are changed to one which does
not support the selected symbol set,
this must be changed to an available
symbol set for that font.
A4 PRINT
WIDTH
78 COLUMN
80 COLUMN
Sets the number of columns subject to
Auto LF with A4 paper in PCL. This is
the value when Auto CR/LF Mode is set
to OFF with the 10CPI character.
WHITE PAGE
SKIP
OFF / ON
Selects whether blank pages are
printed or not.
CR FUNCTION
CR / CR+LF
Selects whether a received carriage
return character (0Dh) also causes a
line feed.
ITEMS
SETTINGS
EXPLANATION