Olympus VP--1 - Manual (Page 55)

E-55
Setup
●
Select menu name “Setup”.
See “Menu Operation Method” on Pages E-37 to E-45 for information about performing menu operations.
The item name display will differ depending on the input signal. See “List of Item Names Offering Input
Selection and Adjustments/Settings” on
Pages E-44 and E-45 .
Language
This function sets the language that is displayed on screen
in the messages and menu displays.
1. Select item name “Language” and press the cursor ( ᮣ ) button.
The selection display will open.
2. Select with the cursor (
▲▼) buttons (or with the main unit ( )
button).
The Auto Source function automatically detects the input sig-
nal when the power supply is switched on and when the in-
put is switched.
Select the item name “Auto Source” and select the setting con-
tents with the cursor (
ᮤ ᮣ ) buttons.
On ............... Switches on the automatic detection function
Off .............. Switches off the automatic detection function
Auto Source
Order of Signal Detection
The search is repeated in the order of Analog RGB
→ YPbPr → Digital RGB → Video → S-Video →
YCbCr. When a signal is detected, the search is stopped and the image is projected.
Note
Set “YPbPr” to “Enable” (i.e., valid) when inputting a component signal YPbPr.
When “YPbPr” is set to “Disable”, detection is not possible. See
Page E-57.
Language
Auto Source On
Off
On
Black
Auto Power Off
On Screen
Menu Position
YPbPr
Background
Disable
Language
Auto Source Off
Off
Off
Blue
Auto Power Off
On Screen
Menu Position
YPbPr
Background
Disable
English
Deutsch
Français
Italiano
Español
Svenska
Language
Auto Source On
Off
On
Black
Auto Power Off
On Screen
Menu Position
YPbPr
Background
Disable