Olympus VP--1 - Manual (Page 24)

E-24
Power Cable Connections and Switching the Power On/Off
There is an order in which the power cable is connected and the power is switched on/off.
Operating
1
Connect the AC IN connector of the projector and the power outlet using the sup-
plied power cable.
The POWER indicator will light amber, the cooling fan will rotate at low speed, and the unit will enter
the standby mode.
POWER
AU TO
MEN
U
STATUS
PO WER
SO
UR CE
QU ICK MEN
U
PC
AUDIO
VIDEO
STATUS POWER
Lit amber
To wall outlet
Firmly plug in all the way.
2
Turning on the projector power
Main unit operation: Press and hold the POWER button for 1 second.
Remote control operation: Press the POWER ON button.
ON OFF POWER STATUS POWER STATUS POWER STATUS POWER
POWER
Blinks green
(Approximately 60
seconds)
Lit green
Power is on
The POWER indicator changes to a blinking green and lights steadily after about 60 seconds.
The projection screen brightens after about 40 seconds.
The projector is now capable of regular projection.
3
Switch on the power of the connected equipment