ooma Scout - Manual (Page 37)

33
installing the ooma hub
High-Speed DSL and Phone Service are on Different Lines
Your High-Speed DSL service is delivered on a separate phone jack than your phone service if:
You have a DSL splitter on the outside of your home
You do not have DSL filters connected to each of your phones
You have two phone lines and your DSL service is delivered on the second line (or fax line)
You get no dialtone or cannot place a call if you plug a phone directly into the DSL jack
Your initial setup will look like this:
1
Leave your DSL modem connected as is.
2
Unplug and remove any existing DSL filters or splitters on your phone line (not your DSL line).
3
Use the long phone cable provided and connect the port labeled WALL on the ooma Hub to the phone
jack in the wall (not your DSL jack).
Now your setup should look like this:
Modem
DSL Jack Phone Jack
MODEM HOME
Modem
DSL Jack Phone Jack
WALL