Oki 2024 - Manual (Page 34)

33
Clearing Media Jams (cont.)
Jam 382
(cont.)
If the sheet is inside and
caught in the fuser:
Warning!
The fuser may be very hot from
printing.
1
Caution!
To avoid damage to the drums:
• Be sure to set the toner/drum
cradle on a flat surface
• Do not touch the shiny green area
on the bottom of the drums.
2
Pull the fuser roller lock levers ( 1) at
either end of the fuser forward:
3
Note : If you need to remove the
fuser:
1. Push back on the blue lock
levers at either end and lift it
out.
2. Remove the sheet.
3. Put the fuser back.
4
Push the fuser roller lock levers at
either end of the fuser back: