Olympus DS-320 - Manual (Page 21)

21
Erasing
Erasing
1 Press the INDEX/FOLDER button to choose the
folder containing the message you want to
erase.
2 Move the MENU/VOL switch up
or down to choose the number
of the message you want to
erase.
3 Press the ERASE button for 1
second or longer.
The message number will flash.
4 Press the ERASE button again.
“ERASE” flashes and then “OK”
appears on the display to show the
message is erased.
Message numbers of subsequent
messages are changed automatically,
and available recording time increases
approximately by the length of the
erased message.
................................................................................................
Notes
• If you do not press the ERASE button within 4 seconds after Step 3
above, or if you press the STOP button, the recorder will cancel
message erasure and will return to the screen in Step 2.
• The remaining recording time available after message erasure depends
on the recording mode (R-TIME) setting.
3,4
2
1
SP DICT
INDEX/
FOLDER
REC
STOP
ERASE
MENU
/VOL
Message number
Erasing One Message at a Time
A selected file can be erased from a folder.