Olympus DS-320 - Manual (Page 13)

13
Setting an ID
Setting an ID
If an ID is set, it is automatically included in each message to help identify who recorded the
message when it is transferred to a PC. Setting IDs is recommended for easier management of
recorded messages. To set an ID, stop the recorder and follow these steps:
1 Press the MENU/VOL switch.
The menu appears on the display.
2 Move the MENU/VOL switch up
to choose the “ID AAAA”
screen.
3 Press the MENU/VOL switch.
The cursor flashes at the first
character position.
4 Move the MENU/VOL switch up or
down to choose the first
character.
Characters are selectable from A to Z
and 0 through 9.
5 Press the MENU/VOL switch.
Accepts the character and moves to the next position.
Repeat the steps above to set a four-character ID.
6 Press the STOP button.
This completes the ID setup procedure.
................................................................................................
Note
If you leave the recorder idle for 3 minutes or longer during a setup
operation, any settings entered to that point will be canceled.
6
2,4
1,3,5
SP DICT
INDEX/
FOLDER
REC
STOP
ERASE
MENU
/VOL