Setting time/date, Hold, Using the menu/vol switch – Olympus DS-320 User Manual
Page 11
11
SP DICT
INDEX/
FOLDER
REC
STOP
ERASE
MENU
/VOL
STOP button
MENU/VOL switch
All of your recorded messages will be stamped
with the time and date that you finished
recording. This feature is useful to manage
your recordings.
If the time and date are not set, this information
will be inaccurate.
Using the MENU/VOL switch
Note
When batteries are inserted for the first time, the clock
starts running from its initial state (January 1, 2000,
12 a.m.).
Setting Time/Date
Hold/Setting T
ime/Date
MENU
/VOL
MENU
/VOL
Setting the HOLD switch to the HOLD position
locks the recorder. All buttons will be disabled
and the display becomes blank. This is useful
when the recorder is carried in a bag,
briefcase, or your pocket because no buttons
will work accidentally.
Remember to release the HOLD switch
when using the recorder.
Notes
• When setting the HOLD switch to the HOLD
position while playing a message, the recorder
continues playing until reaching at the end of
message.
• When setting the HOLD switch to the HOLD
position while recording a message, the recorder
continues recording until available recording time
runs out.
• The recorder automatically stops and the display
becomes blank after completion of playing or
recording. All buttons are disabled as long as the
switch is set to HOLD position. To stop playing or
recording, you have to release the HOLD switch.
Hold
HOLD
Press
Move up or down