Omega OSP SERIES User Manual
Page 39
39
"
Select
<OK> button to save the preference setting in the PC Memory.
"
From the preference menu you can also set the header and footer line as you need for later printed report.
"
Save model (Save as …) with extension .LMM.
"
Now connect the instrument with the communication cable and turn it on.
"
Open the file AGC.LMM (if previously closed ).
"
Select the <Data> command from the menu and then the option <Save Tag>. Select for example Tag A and press
the <Ok> button.
"
Disconnect the unit and go on the field to take same measurements (see also cap.10 to operate in an acquisition
mode).
"
Start this procedure with the OSP switched -Off-
"
Keep the <MEM> key pressed and, simultaneously, press the <Trigger> until the following indication is displayed :
e
Log
°C
Lock
•
Press the <▲> or <▼> key to select the Tag A identification code.
e
Log
°C
Lock
•
Press the <SEL> key to display the number of memory locations still available.
e
Log
°C
Lock
Data can be recorded in the selected Tag in manual or automatic mode. About the acquisition mode and setting of time
acquisition, refer to par. 9.5.
•
If necessary, press the <SEL> key to obtain the page that allows the clearing of the previous memory stored data in
the Tag A: