Olympus LS-11 - Manual (Page 26)

Ab
ou
t R
ec
ord
ing
2
Recording
Recommended settings by recording condition
The recorder is set up so that it can perform high quality recording equivalent to that of a music CD right away.
The various functions relating to recording can be configured in detail to suit the recording conditions.
Recording
settings
Recording condition
Indoor musical
performance
Band
performance
in a practice
studio
Performance
in a vast hall,
etc.
Outdoor
environment
sounds like
wild birds
singing,
railroad
noises, etc.
Conferences
with large
crowds in
vast meeting
venues
Conferences
with a few
people
indoors
Recording level*
(☞ P.23)
When the [Rec Level] is set to [Manual] you can adjust the recording level.
Adjust while looking at the level meter
Microphone
sensitivity
(☞ P.27)
[LOW] [HIGH]
Low Cut Filter
(☞ P.27)
[OFF] [ON]
[Rec Mode]
(☞ P.41, P.43)
The recording level can be adjusted to suit the volume of the original sound
[Rec Level]
(☞ P.41, P.43)
You can configure whether to adjust the recording level automatically or to adjust it manually.
When [Rec Level] is set to [Manual] you can configure the limiter function
[Zoom Mic]
(☞ P.41, P.43)
The directivity of the built-in stereo microphone can be set according to the source to be recorded
[Rec Monitor]
(☞ P.41, P.44)
Select whether or not to output the recording monitor sound from the EAR jack
[Plug-inPower]
(☞ P.41, P.44)
Select whether or not to use the plug-in power function according to the external microphone
connected to the MIC jack
* When [Rec Level] is set to [Auto] the recording level will be adjusted automatically. When this happens,
the recording level adjustment function and limiter function will not work (☞ P.23, P.41, P.43).