Olympus LS-11 - Manual (Page 25)

Ab
ou
t R
ec
ord
ing
2
• [ ] will appear on the display.
• Stop recording and the file that was just
recorded will be played back.
Pause
While the recorder is during recording
mode, press the REC s button.
• [ ] will appear on the display.
• The recorder will time out after 60 minutes
when left in "Rec Pause".
Resume Recording:
Press the REC s button again.
• Recording will resume at the point of
interruption.
To quickly check on the recorded contents
While the recorder is during recording
mode, press the `/OK button.
• When remaining recording time is less than
60 seconds, the [PEAK] indicator light starts
flashing in amber. When the recording time
is decreasing to 30 or 10 seconds, the light
flashes faster.
• [Folder Full] will appear when the folder
capacity is full. Delete any unnecessary files
before recording any further (☞ P.38).
• [Memory Full] will appear when the memory
is full. Change the recordable media or de-
lete any unnecessary files before recording
any further (☞ P.38, P.41, P.46).
• When the recording button of the exclusive
remote control RS30W (optional) is pressed
once, recording will start immediately.
• Depending on the sound recording mode
and the status of record media, the data
transfer to the media cannot be done in time
during recording and the skipped sound may
be recorded. In this case, [Data Write Error]
will appear during recording or when the
recording is finished. After transferring the
data to the PC, format the record media.
• We recommend the media to be formatted
before recording.
Recording