Ricoh Aficio 3235C EN - Manual (Page 41)

Using the Standard TCP/IP Port
35
2
LLLL
Enter the printer name or IP address in the [Printer Name or IP Address] box.
The [Port Name] text box automatically obtains a port name. Change this name
if necessary.
When screen for Device selection appears, select "RICOH NetworkPrinter
Driver C Model".
MMMM
Click [Finish] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.
The installation start dialog box reappears.
NNNN
Check that the port of the selected printer is displayed in [Port:].
OOOO
Configure the default printer as necessary.
PPPP
Click [Finish].
The printer driver installation starts.
QQQQ
Click [Finish] in the installation completion dialog box.
A message about restarting the computer may appear. Restart the computer
to complete installation.
Note
❒ To stop installation of the selected software, click [Cancel] before installa-
tion is complete.
Reference
A message appears if there is a newer version of the printer driver already
installed. If there is, you cannot install the printer driver using Auto Run.
If you still want to install the printer driver, use [Add Printer]. See p.57 “If a
Message Appears during Installation”.
JupiterC2EN-Print-F2_FM.book Page 35 Friday, December 17, 2004 8:17 PM