Ricoh Aficio 3235C EN - Manual (Page 19)

Connecting the Machine
13
1
EEEE
Turn on the computer.
Note
❒ When using Windows 95/98/
Me/2000/XP and Windows
Server 2003, a printer driver in-
stallation screen might appear
when the computer is turned
on. If this happens, click [Cancel]
on the screen. For more infor-
mation, see p.19 “Preparing the
Machine”.
The machine and computer are
now connected. The printer driver
must be installed next. For infor-
mation about how to install the
printer driver, see p.19 “Preparing
the Machine”.
Connecting to the Ethernet
Interface
The network interface board supports
10 BASE-T or 100 BASE-TX connec-
tions.
Important
❒ Before making the connection,
touch the metallic part to ground
yourself.
AAAA
A core for the Ethernet cable is
supplied with this machine. The
Ethernet cable loop should be
about 15 cm (6 in.) (
A A A A) from the
machine end of the cable.
BBBB
Turn off the main power switch.
Important
❒ Make sure the main power is
off. See "Turning On the Pow-
er", General Settings Guide.
CCCC
Connect the Ethernet cable to the
10 BASE-T / 100 BASE-TX port.
DDDD
Turn on the main power switch.
1. Indicator (green)
Remains green when the machine is
properly connected to the network.
2. Indicator (yellow)
Turns yellow when 100 BASE-TX is
operating. Turns off when 10 BASE-T
is operating.
AEV047S
AEU040S
ZKRH050E
JupiterC2EN-Print-F2_FM.book Page 13 Friday, December 17, 2004 8:17 PM