Ricoh RDC-5000 - Manual (Page 44)

42
Internal memory SmartMedia memory card
Note • If the keep settings function is enabled, the flash, exposure
compensation, white balance, recording mode, date imprint, language,
card/in and S mode settings in effect just before the camera was turned
off are saved. See “Keep settings” (p.106).
Selecting IN/CARD (Internal memory/SmartMedia
memory card) Memory
Select whether to record shot files in internal memory or on the SmartMedia memory
card mounted in the camera.
■ Switching Modes
The mode screen changes in the following sequence as you switch the recording
destination:
* When the SmartMedia memory card is inserted, the will be displayed.
■ Selecting a Recording Destination
q
Press the CARD/IN button and select a
recording destination (
).
The recording destination changes each time
the CARD/IN button is pressed. Press the
CARD/IN button and make your choice.
Note
• If a SmartMedia memory card is
mounted in the camera when it is
turned on, the
mark appears on the
LCD monitor or the LCD panel. Enable
the save mode to set internal memory
as a recording destination. See “Keep
Settings” (p.106).