Canon IXUS 60 - Manual (Page 96)

94
Troubleshooting
Camera
Camera will not operate.
Power is not turned on. Press the power button (Basic
Guide p. 5).
Memory card slot/battery
cover is open. Confirm that the memory card slot/
battery cover is securely closed
(Basic Guide p. 2).
Insufficient battery
voltage ("Change the
battery pack" message
displays). Insert a fully charged battery into the
camera (Basic Guide p. 2).
Use the AC Adapter Kit ACK-DC10
(sold separately) (p. 111) .
Poor contact between
camera and battery
terminals. Polish the terminals with a soft
cotton swab before charging or
using the battery
(p. 107) .
Sounds come from the camera interior.
The camera's horizontal/
vertical orientation was
changed. The camera's orientation
mechanism is operating. There is no
malfunction.
When the power is turned on
"Card locked!" message appears.
The SD memory card's
write protect tab is set to
"Write protect". When recording to, erasing from or
formatting the SD memory card,
slide the tab upward
(p. 109) .
The Date/Time menu appears.
The built-in rechargeable
lithium battery charge is
low. Recharge the built-in battery
immediately (Basic Guide p. 4).