Canon IXUS 60 - Manual (Page 130)

128
Setting available ( Default setting)
U Setting can only be selected for the first image. ( S Default setting)
(Shaded Area):Setting is retained even when the camera power is shut off.
With the exception of the [Time Zone], [Date/Time], [Language] and [Video System]
settings, all the other menu settings and changes made with the camera buttons
can be reset to the default values in a single operation (p. 31) .
(1)(2) The recording pixels and frame rates for the (Movie) mode are as follows.
(3) The default flash setting is Auto Red-eye Reduction in the
modes, Auto in the modes, and Off in the modes.
- The flash cannot be set in mode.
- When the flash fires in mode, the camera will automatically use Slow Synchro
mode.
(4) You cannot switch between the Macro/Infinity modes when the camera is in the
modes.
(5) Cannot be selected in the or mode.
(6) AF cannot be selected in the modes.
(7) The AF-assist Beam cannot be set in mode.
(8) [Off] cannot be selected in the mode.
(9) Can even be set during shooting (Standard only).
(10) Automatically set by the camera.
(11)
can be selected.
Autofocus Modes – (6) – – p.46
AF-assist Beam (7) U p.27
Digital Zoom (8) – – (9) p.35
Metering
Method
Evaluative – (10) – (10) – (10) – (10)
p.50 Center-Weighted Average – – – – –
Spot – – – – –
Exposure Compensation – – U – p.51
Exposure Shift – – – – – – p.42
Long Shutter – – – – – – p.52
White Balance – – (10) – (10) U (5) p.54
My Colors – – – U (5) p.57
ISO Speed (11) – (10) – (10) – – p.64
Auto Rotate U – p.65
Grid Lines – p.27
Recording Pixels Frame Rate
– –
– – – –
– – – –
Function Page