Important – Renesas Single-Chip Microcomputer M34519T-MCU User Manual
Page 9
( 7 / 36 )
Note on MCU board Installation:
• Before installing and removing the MCU board, always be sure to power off the PC4504 emulator
main unit and unplug its power cord from the outlet.
Note on Registers that Can be Operated from M3T-PD45
• The table below lists the registers that can be operated from M3T-PD45. The "Yes" in the table
means that the register can be operated; the "No" means that the register can not be operated.
IMPORTANT
Notes on Connecting the Target System:
• When connecting the target system, be sure to shut off the power of the emulator and the target
system.
• Connect the emulator probe carefully.
• When connecting the emulator probe, use care not to twist the cable. An excessive twist may cause
breaking of the wire.
Register
Reference
Modification
Remarks
Register
Reference Modification
Remarks
PC
Yes
Yes
W3
Yes
Yes
CY
Yes
Yes
W4
Yes
Yes
A
Yes
Yes
W5
Yes
Yes
B
Yes
Yes
W6
Yes
Yes
D
Yes
Yes
J1
Yes
Yes
4518 and 4519 only
E
Yes
Yes
Q1
Yes
Yes
X
Yes
Yes
Q2
Yes
Yes
Y
Yes
Yes
Q3
Yes
Yes
Z
Yes
Yes
K0
Yes
Yes
V1
Yes
Yes
K1
Yes
Yes
V2
Yes
Yes
K2
Yes
Yes
I1
Yes
Yes
PU0
Yes
Yes
I2
Yes
Yes
PU1
Yes
Yes
MR
Yes
Yes
FR0
No
Yes
RG
No
Yes
FR1
No
Yes
PA
No
Yes
FR2
No
Yes
W1
Yes
Yes
FR3
No
Yes
4518 and 4519 only
W2
Yes
Yes
SI
Yes
Yes
4518 and 4519 only