Robertshaw 9620 - Manual (Page 10)

◆ QuickSet™ Programming Mode
QuickSet™ will program all 7 days of the week with the same program.
1. Place COOL-OFF-HEAT-EM
in COOL or HEAT position.
2. Press and hold SET. Press the button.
Release simultaneously.
3. The MORN indicator should be blinking. Program the time of day and
the temperature as outlined in the Setting Daily Program section.
◆ Setting Daily Programming
1. Place COOL-OFF-HEAT-EM
in COOL position.
2. Press SET button. The display will
show a number from 1 to 7. This
number represents the day of the
week to be programmed. If pro-
gramming individual days, press
either or button
to adjust
the day of the week to program.
3. Press SET. Press or to change
MORN time.
4. Press SET.
5. Press or to change
MORN temperature.
6. Repeat steps 2-5 for DAY, EVE, and NITE.
7. Repeat steps 2-6 above to program
any other day of the week.
8. Shift COOL-OFF-HEAT-EM to HEAT position.
9. Repeat steps 2-6 to program HEAT (winter) settings.
10
>
>
PROG
MAN
SET PROG/MAN COOL-OFF-HEAT-EM
AUX CHECK EMER
AUTO - ON >
>
COOL-OFF-HEAT-EM
SET PR
>
>
>
>
PROG
MAN
SET PROG/MAN COOL-OFF-HEAT-EM
AUX CHECK EMER
AUTO - ON
>
>
SET PR
>
>
PROG
MAN
SET PROG/MAN COOL-OFF-HEAT-EM
AUX CHECK EMER
AUTO - ON
> >
SET P
>
>
COOL-OFF-HEAT-EM
COOL-OFF-HEAT-EM
>
>