Renesas Emulation Pod M37760T-RPD-E - Manual (Page 46)

( 44 / 64 )
Chapter 5. Specifications
5.1 Specifications
Table 5.1 lists the specifications of the M37760T-RPD-E.
Table 5.1 M37760T-RPD-E specifications
PC4701
7760 Group 7760:
M37760M8, M37760MC, M37760MF, M37760FF, M37760EF
7760 Group 7762:
M37762M8, M37762MC, M37762MF
7760 Group 776A:
M3776AM8, M3776AMF
M37760FFH-TOOL
XIN = 12 MHz, double-speed mode: 4.0 to 5.5 V
XIN = 16 MHz, high-speed mode: 4.0 to 5.5 V
XCIN = 32.768 kHz, low-speed mode: 2.6 to 5.5 V
Single-chip mode
Fixed 256 KB (banks 00 - 03 fixed)
VCC = 4.0 to 5.5 V: XIN = 12 MHz double-speed mode (ø = 12 MHz)
VCC = 2.6 to 5.5 V: XCIN = 32.768 kHz low-speed mode
XIN-XOUT Internal oscillator circuit board (OSC-3: 16 MHz)
Switchable to external oscillator input
OSCIN3 Internal oscillator circuit board (OSC-3: 14.318 MHz)
XCIN-XCOUT 32.768 kHz (mounted in the emulation pod)
Switchable to external oscillator input
1. Supplied from an emulator.
2. The operating voltage of the emulation pod is determined by
detecting the supply voltage of the target system. When no target
system is connected, or when the supply voltage of the target system
is more than 5.0 V, the operating voltage is 5.0 V.
Refer to "3.5 Connecting the Target System" (page 31).
5 to 35 ° C (no dew)
-10 to 60 ° C (no dew)
• U.S. EMI standards (FCC part 15 Class A)
• CE marking (EN55022, EN55024)
Emulator
Applicable MCUs
Evaluation MCU
Power voltage
Usable mode
Emulation memory
Maximum operating frequency
Clock supply
Power supply to emulation pod
Connection to target system
Operating temperature
Storage temperature
International standards