4 connecting the pc4701, 1) connecting the cable to the pc4701, Caution – Renesas Emulation Pod M37760T-RPD-E User Manual
Page 31
( 29 / 64 )
3.4 Connecting the PC4701
To connect the emulation pod to the PC4701, use the FLX120-RPD 120-pin flexible cable included
in this product package. Connect the PC4701 side connector of the FLX120-RPD to the cable
connector of the PC4701, then secure with screws.
(1) Connecting the Cable to the PC4701
Figure 3.8 shows how to connect the PC4701 and FLX120-RPD.
Figure 3.8 Connecting the PC4701 and FLX120-RPD
CAUTION
Note on Connecting the Cable:
• To connect the FLX120-RPD, be sure to hold the both sides of the PC4701 side
connector horizontally with the "UPSIDE" facing up.
• Always shut OFF power before connecting the cable. The power ON state could
destroy internal circuits.
Note on Securing the Screws:
• After connecting the emulator main unit to the FLX120-RPD, be sure to secure the
screws.