Royal Sovereign RSS-1050 - Manual (Page 16)

1.This function allows you to check the current
temperature on the shoes.
2.Press
then temperature is shown on the
display while display is blinking.
3.It shows current temperature 5 times then returns
to temperature which the operator has set.
4.It shows "LO" when the temperature is 40°c (104°F)
or below. Only when the current temperature is over
41°c (106°F) will it show the exact temperature on
on the shoes.
1.You can do cold lamination with this function.
2.Press the
button to show "COLD"
on the display.
3.Speed will always show 2 and there is no memory
of working condition shown.
4.Speed can be varied 1 or 2 by selecting
button.
5.You release the machine from cold mode by
pressing button.
6.Everytime you press the button, buzzer is ringing
7.ST/BY mode is not working at COLD mode.
***Check current temperature on the shoes.***
***Cold mode***
SPEED
COLD
MEMORY
ST/BY
T-CHECK
ST/BY
T-CHECK
C/HOT
T-CHECK
MEMORY
SPEED
C/HOT
MEMORY
- 16 -