Royal Sovereign RSS-1050 - Manual (Page 15)

1) Memorize working condition
1.Operator can memorize 9 working conditions.
2.Each time you press the button, buzzer is ringing.
3.find the condition number you are willing to memorize
working condition by pressing
button.
4.When you finish setting upper/lower temperature and
speed, you can press the memory button.
This working condition is memorized while buzzer is
ringing with blinking.
operation over.
2) Use the memorized working condition.
1.Operator can choose one of 9 memorized working
conditions.
2.Press
a working condition. The display will blink.
3.After the blinking stops, it is set the working condition you
selected and shows the working condition on the display.
time, memory number is blinking together, it means that working cocdition is not
***Memorizing Working condition and Using
the memorized working condition***
the or to select
*If you change the temperature or speed and the display shows blinking at the same
set. When you memorize working condition, you have to press button.
5.When you memorize another working condition, you can do above 3 and 4
MEMORY
UPPER
LOWER MEMORY
SPEED
MEMORY
MEMORY
MEMORY
MEMORY
- 15 -