Radio Shack 43-3880 - Manual (Page 55)

T
he I
n
tegrat
ed
A
n
swering Device
55
4. Press SKIP/SELECT or
REPEAT/SELECT until you hear the
correct hour setting.
The numbers
1 through 1 2 appear on
the base as each hour is announced.
5. Press SET to select the hour.
6. Press SKIP/SELECT or
REPEAT/SELECT until you hear the
correct minute setting.
The numbers
0 0 through 5 9 appears on
the base as each minute is announced.
7. Press SET to select the minute.
8. Press SKIP/SELECT or
REPEAT/SELECT until you hear the
correct AM or PM setting.
The message counter displays or .
9. Press SET to select the AM/PM setting.
A confirmation tone sounds, the day
and time you set are announced for
your review.
Setting a PIN code
To play your messages from a remote
location, you will need to enter a two-digit
Personal Identification Number (PIN) code.
To select a PIN code, perform the following
steps:
1. Press CLOCK/MENU twice. The current
PIN code appears on the base and it is
announced.
2. Press SKIP/SELECT or
REPEAT/SELECT until the desired
number appears. Press and hold
SKIP/SELECT or REPEAT/SELECT
to quickly scroll through the numbers
on the display.