Radio Shack 43-3880 - Manual (Page 33)

Making and Receiving Call
s
33
T
HREE
-W
AY
C
ONFERENCING
The phone permits Three-way
conversations between the handset, base,
and an outside line.
Ô
When speaking on the handset
1. Press SPEAKER on the base to initiate
the three-way conversation.
2. To hang up, press SPEAKER on the
base. The handset will still be
connected to the call.
When speaking on the base
1. Press TALK/FLASH or SPEAKER on the
handset to initiate the three-way
conversation.
2. To hang up, return the handset to the
cradle, or press END key on the
handset. The base will still be
connected to the call.
F LASH AND C ALL W AITING
If you have Call Waiting service and a call
waiting tone sounds while you are on a call,
press
TALK/FLASH to accept the waiting
call. There is a short pause, and then you
will hear the new caller. To return to the
original caller, press
TALK/FLASH again. Ô
N
EW
M
ESSAGE
LED
The new message LED on the handset is
designed to work with your answering
system. The LED flashes when you have
new messages in your answering system.
The LED stops flashing when all new
messages are played back (see “Using
Your Answering System” on page 60).
Ô
NOTES
Ô
Three-way Conferencing
If you have more than one
handset, the phone permits
Four-way conversations,
see “Four-Way
Conferencing” on page 48
for details.
Flash and Call Waiting
You must subscribe through
your local telephone
company to receive Call
Waiting or Caller ID on call
waiting service.