Pre l iminar y – Runco LIGHTSTYLE LS-HB User Manual

Page 39

Text mode
Original mode

Runco LS-HB Installation/Operation Manual

PRE

IMINAR

If you are mounting the projector on a ceiling: Line up the holes on the Ceiling
Mount Plate (included with the projector ceiling mount kit) with those on the bottom of
the projector and attachment plate.

Secure the Transport Assembly Attachment Plate and Ceiling Mount Plate to the
projector using the hardware provided with the attachment plate, as shown.

1. Do not use the mounting screws provided with the ceiling

mounting kit. Use only the hardware provided with the Transport
Assembly Attachment plate.

2. DO NOT OVER-TIGHTEN THE SCREWS.

Caution

Screw, Phillips PH,

M4 x 30mm

Lock Washer

Flat Washer

5/8" Nylon Spacer

Ceiling Mount Plate

Attachment Plate

Projector (bottom)

Hardware for Attachment Plate
and Ceiling Mount Plate (4 Places):

Attachment Points

for Security Hooks