Runco LIGHTSTYLE LS-HB - Manual (Page 101)

Serial Communications
Runco LS-HB Installation/Operation Manual 85
PRE
L
IMINAR
Y
7 Fan 1 failed.
8 Fan 2 failed.
9 Fan 3 failed.
10 Fan 4 failed.
11 Fan 5 failed.
12 Fan 6 failed.
15 DDP3021 communication failure upon system
power-up.
16 Lamp failed to ignite (three attempts) upon system
power-up.
17 Lamp failed during operation.
18 Ballast UART communication failure.
19 PCF8575 external GPIO communication failure.
20 Lamp door is open.
21 Gennum SPI communication failure upon system
power-up.
22 System hardware I2C communication failure.
23 System software I2C communication failure.
24 EEPROM checksum error.
25 EDID checksum error.
Table 6-3. RS-232 Error Codes (continued)
Error Code LED Indication Description