Roberts Radio WM201 User Manual

Page 15

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)

()~ END ◄ ►01

PASSWORD█

10. If you make an error use either the Back key on the remote control

to delete the character entered, or give a long press on the Select

control. Use the left and right arrows to move the block cursor to access

incorrectly entered characters.

11. After the ﬁnal character of the WEP or WPA key has been entered,

locate the 'END' symbol and press the Select control. (The 'END'

symbol is located between the punctuation symbols and the numbers

0 - 9.) The radio should now be able to connect to the network.

After you have connected to your network

1. Once connected to your radio to the network (and therefore also to

the Internet) it will display the main Mode menu. This menu provides

access to all major functions of the radio. There are also buttons on

the remote control for each of the Mode menu options except for the

Conﬁgure menu.

2. Rotate the Select control until the 'Off' option is highlighted on the

display.

3. Press the Select control to put the radio in Standby mode. It should

then display the time. This time is obtained by the radio using its Internet

connection. If the time display is not correct don't worry at this stage.

It can easily be adjusted later, see page 41, 'Setting the clock'.

Radio Stations

Media Player

Auxiliary input

Alarm clock

Conﬁgure

Off

1-2

9:30

Connecting to

network

Network OK