Raypak XPAK 120 - Manual (Page 5)

5
Boiler status
The boiler status and communication
status are displayed
OT+ communication correct
Flame present in boiler
Current heating demand in boiler
Current domestic hot water
demand in boiler
Current heating program
Control panel operating mode
The current operating status of the control panel is
shown on this row of the display:
Standby / OFF
Automatic operation Heating according to
program 1
Automatic operation Heating according to
program 2
Continual heating at comfort temperature
Continual heating at setback temperature
Summer mode
System information
Some system information is shown on the central line of the display.
The ambient temperature and time are normally displayed 70 °F 16:32
If the holiday function is enabled, the time remaining in days
. d e y a l p si d si
In case of a fault, ambient temperature and fault code are displayed. 70 °F E001
Turn the right-hand knob (EDIT) to view:
- Outdoor temperature (only if the outdoor air sensor is installed
in the )r e li o b
- Boiler supply temperature °F 128.7
- Boiler supply temperature setpoint
(calculated by the remote control unit)
°F 128.7
- Domestic hot water temperature at boiler °F 116.0
The day of the week is
indicated by the corresponding
segment lighting up on the
first row of the display.
Day of the week
Shows the current heating program.
AF °F 60.3
HO 05
Radio communication function
(not used on REC08)
Solar panel thermostatic control
Status during Service Technician repair
(not used on REC08)
(not used on REC08)
-- --
- Battery charge status (not used on REC08)
Fig. 3: Run Mode