beautypg.com

9 lock bit/enable – Renesas M3S-UFLA32R User Manual

Page 25

background image

M3S-UFLA32R

UART Flash Memory Programming Utility

REJ10B0239-0140/Rev.1.40

Mar. 2007

Page 19 of 30

5.9 Lock Bit/Enable

(1) Choose [Lock Bit]-[Enable(E)] from [Device(D)] menu to display the dialog that shows execution

process, and then enable lock bit. After completing enabling lock bit, the dialog is closed and "Lock
Bit Enable…finish" dialog is displayed.

Note: It can not perform erase or write operation against the block with the lock bit that is enabled and set.

Clear lock bit to perform erase or write operation.
After powering, lock bit becomes enabled.


Figure 5.9.1 Lock Bit Enable

(2) Click [OK] in the "Lock Bit Enable…finish" dialog to close the dialog.


Figure 5.9.2 Lock Bit Enable Finish Dialog

See also other documents in the category Renesas Hardware: