Renesas M3S-UFLA32R - Manual (Page 14)

M3S-UFLA32R
UART Flash Memory Programming Utility
REJ10B0239-0140/Rev.1.40 Mar. 2007 Page 8 of 30
5. Function Description of the M3S-UFLA32R
5.1 Function List
Table 5.1 lists functions of the M3S-UFLA32R. Choose each function from menu or click a button
for execution.
Table 5.1 Function List
Menu Button Function Reference
Load Refer Read the program data of specified Motorola S
format file into the internal buffer 5.2 File
Exit - Exit the M3S-UFLA32R 5.3
Display Lock Bit Information - Display lock bit information 5.4
Program Program Write program data from internal buffer to the flash
memory 5.5
Erase Erase Erase all blocks from the flash memory 5.6
Block Erase - Erase the specified blocks from the flash memory 5.7
Lock Bit / Set - Write lock bit to the specified blocks in the flash
memory 5.8
Lock Bit / Enable - Enable memory protect by the lock bit 5.9
Lock Bit / Disable - Disable memory protect by the lock bit 5.10
Blank Check Blank Check Check if all the flash memory blocks are erased 5.11
Verify Check Verify Check Check if the program data of internal buffer and the
program data written to the flash memory are
corresponding
5.12
Batch processing
/ E.B.P.V. E.B.P.V. Consecutively execute Erase, Blank Check,
Program, and Verify Check
5.13
Batch processing
/ E.P. E.P. Consecutively execute Erase and Program 5.14
Device
Batch processing
/ B.P.V. B.P.V. Consecutively execute Blank Check, Program, and
Verify Check
5.15
Setting - Perform MCU selection, Verify method selection, and
ID code write control 5.16 Others
ID Code Setting - Set the ID code to be used at ID verification 5.17
Help Version information - Display the versions of the M3S-UFLA32R and F/W 5.18