RCA VG4259 - Manual (Page 26)

24
Recording a Program
One Touch Recording
One Touch recording lets you record up to four hours without using the timer program feature. The VCR
turns off automatically at the end of the recording.
1. Turn on the VCR.
2. Insert a tape with its safety tab in place.
3. Select the channel you want to record.
4. Use SPEED on the remote to select a recording speed.
5. Press REC on the remote or RECORD on the VCR twice to start
recording.
6. Press RECORD or REC repeatedly until the amount of recording time for
the program is displayed on the TV screen.
Each press of RECORD or REC increases the time Ñ 30 minutes up to 4
hours.
The amount of time the VCR records, power indicator flashes, and TIMER
indicators lights in the VCR display panel.
During recording, press RECORD on the VCR or REC on the remote to
display the time remaining on the TV screen. Press RECORD or REC again
to increase the recording time.
Stopping a One Touch Recording in Progress
You can stop a recording by:
¥ Pressing and holding the STOP button on the remote or STOP•EJECT on
the VCR for approximately three seconds.
¥ Pressing the RECORD button until 0:00 is displayed for the recording.
REC CH 06
RECORD LENGTH 0:00
PRESS REC TO SET LENGTH
Display on TV Screen
Press Recording
RECORD Time
0:30 ( 30 Min)
1:00 (1 Hr)
1:30 (1 Hr, 30 Min)
2:00 (2 Hrs)
3:00 (3 Hrs)
4:00 (4 Hrs)
Normal Record
0:00 Turns Off
REW PLAY•PAUSE FWD RECORD POWER TV•VCR CHANNEL
TRACKING
STOP•EJECT VCR
RECORD
Display showing 30 minutes
remaining for recording