RCA SystemLink 6 AV RCU600RS User Manual

Page 9

ON OFF

DBS•SAT

VCR

DVD

CABLE

AUDIO

ON OFF

DBS•SAT

VCR

DVD

CABLE

AUDIO

Programming With Code Search

Identifying Codes From Your Universal Remote

1. Manually turn on the device you wish to

program.

2. Press and hold

CODE SEARCH

until the

INDICATOR LIGHT

lights, then release

CODE SEARCH.

3. Press and release the device button for the

device you are programming. The

INDICATOR LIGHT

will blink once,

then remain lit.

4. Press and release

ON•OFF

until your

device turns off.

Important:

You may have to press

ON•OFF up to 200 times.

5. When your device turns off, press

ENTER

, the

INDICATOR LIGHT

will

turn off.

1. Press and hold

CODE SEARCH

until the

INDICATOR LIGHT

lights, then release

CODE SEARCH.

2. Press and release the device button for

the code you are retrieving. The
Indicator Light will blink once.

3. Press and release

CODE SEARCH

. The

INDICATOR LIGHT

will turn off.

4. Starting with

on the keypad, press the

number buttons in order (

0-9

) until the

INDICATOR LIGHT

blinks.

5. The number which causes the indicator

light to blink is the first digit of your
code.

6. Repeat step 4 until you have retrieved all

three numbers in the code.

If your TV, VCR, DBS Satellite System, DVD Player, Cable Box or
Audio System does not respond after you have tried all the codes for
your brand, or if your brand is not listed, try searching for your code
by following the steps below.

If you need to find the three-digit code for your TV, VCR, DBS
System, Cable Box or Audio System after your device is set-up
use this procedure.

(OFF)

INDICATOR

LIGHT

ON OFF

ENTER

…

(OFF)

INDICATOR

LIGHT

CODE

(BLINK)

The Sleep Function will turn off your TV automatically after the user
programs the time interval from one (1) to ninety-nine (99) minutes.

Sleep Function

1. Press and hold the

SLEEP

button. The

INDICATOR LIGHT

will stay lit. Release

the

SLEEP

button.

2. Enter time in minutes using the

numerical key pad. Indicator light
will go off.
(Min: 1 minute/keypad entry 0-1)
(Max: 99 minutes/keypad entry 9-9)

3. Leave remote aimed at television.

IMPORTANT:

Sleep Feature will not

work unless remote is left aimed at
television.

ON OFF

INDICATOR

LIGHT

To Turn Off The Sleep Timer:

1. Sleep timer program will be cancelled

and reset to zero by either of the
following:

Press and hold

SLEEP

button until

INDICATOR LIGHT

blinks or press

ON•OFF

button, turning TV OFF.

(BLINK)

…

The Menu Function is used to make changes in the selected settings such
as setting color, channels, timer, etc. The MENU button invokes TV, DVD
and DBS•SAT Modes. Each menu will vary from brand to brand.

Menu Function

Entering the Menu Mode:

1. Push the device button on the remote

for the desired menu screen.

2. Push the Menu button. This allows you

to view the menu of the device chosen.
The menu should now be visible on
your television.

3. While in Menu Mode these buttons will

function as follows:

Navigation Left/Right buttons will
operate as cursor right and left.

Navigation UP/DOWN buttons will
operate as cursor up and down.

MENU

button applies the highlighted

menu item.

SELECT

button may also be used to

select the menu item, especially in
DVD.

Not all functions in competitive models
and brands of televisions may be fully
supported.

EXITING THE MENU MODE

Push the

CLEAR

key to return to

normal operation.

(BLINK)

DBS•SAT

DVD

RCU600RS manual 4/11/01 12:15 PM Page 16