RCA SystemLink 6 AV RCU600RS User Manual

Page 6

DVD Codes

Programming For DVD

1. Manually turn on the DVD System.

Find the three digit code for your DVD
System in the code list below.

2. Press and hold the

CODE SEARCH

button until the

INDICATOR LIGHT

lights, then release the

CODE SEARCH

button.

3. Press and release the

DVD

button

(The

INDICATOR LIGHT

will blink

then remain lit).

4. Enter the code using the Number

Buttons.

After your code is entered, the

INDICATOR LIGHT

will turn off. If

the code is not valid, the

INDICATOR

LIGHT

will blink. Check the code list

and repeat process.

5. Aim the remote at your DVD System

and press the

ON•OFF

button. Your

DVD System should turn off.

6. If the DVD System responds, no further

programming is required.

Note: If your DVD does not respond, try all the
codes for your brand. If the codes do not work,
or your brand is not listed, try the Code Search
method on page 16.

7. Enter your code here for easy reference.

Most RCA, GE and ProScan DVD systems will not require
programming. Check to see if your DVD System responds
to the remote before you begin programming.

(OFF)

DVD CODE

(BLINK)

INDICATOR

LIGHT

ON OFF

DVD

CODE

Aiwa ........................................350

Hitachi ......................................351

JVC....................................161, 352

Konka ..............................353, 354

Magnavox ................162, 356, 357

Mitsubishi ................................163

Panasonic ................................355

Philips ......................162, 356, 357

Pioneer......................................165

ProScan ....................................160

RCA ..........................................160

Sanyo ........................................359

Sony ..........................166, 360, 361

Toshiba ....................167, 362, 363

Zenith ......................................364

Satellite Codes

Programming For DBS System

1. Manually turn on DBS System.

Find the three digit code for your DBS
System in the code list below.

2. Press and hold the

CODE SEARCH

button until the

INDICATOR LIGHT

lights, then release the

CODE

SEARCH

button.

3. Press and release the

DBS•SAT

button

(The

INDICATOR LIGHT

will blink then

remain lit).

4. Enter the code using the Number

Buttons.

After your code is entered, the

INDICATOR LIGHT

will turn off. If

the code is not valid, the

INDICATOR

LIGHT

will blink. Check the code list

and repeat process.

5. Aim the remote at your DBS System

and press the

ON•OFF

button. Your

DBS System should turn off.

Note: If your DBS System does not respond,
try all the codes for your brand. If the codes do
not work, or your brand is not listed, try the
Code Search method on page 16.

6. With your DBS System on, press

CH+

(CHANNEL UP). If the satellite system
responds, no further programming is
required.

7. Enter your code here for easy reference.

Most RCA, GE and ProScan Satellite systems will not require
programming. Check to see if your DBS Satellite System
responds to the remote before you begin programming.

(OFF)

SATELLITE CODE

(BLINK)

INDICATOR

LIGHT

ON OFF

Alphastar..................................079

Echostar (Dish System) ..........089

Echosphere (Dish Net) ..........079

GE..............................071, 080, 081

Hitachi SYS I............................084

Hitachi SYS II ..........................083

Hughes ............................077, 090

Magnavox ................................085

JVC ............................................082

Panasonic ................................075

Philips ......................................085

Primestar ..................................076

Proscan ....................071, 080, 081

RCA ..........................071, 080, 081

Sony ..........................................072

Toshiba......................................073

Uniden ......................................086

DBS•SAT

CODE

RCU600RS manual 4/11/01 12:15 PM Page 10