Ar-3000 settings that can be used, Some functions are not available. (p. 55), 55 appendices – Roland AR-200 User Manual
Page 55
55
Appendices
Appendices
MIDI settings
MIDI OUT:
OUT
(MIDI OUT/THRU)
MIDI note map:
C-1:
Phrase A0001
↓
G9:
PhraseA0128
MIDI note out:
OFF
MIDI channel:
OFF
MIDI note trigger:
Trigger
MIDI receive messages:
OFF
• Note on Velocity:OFF
• Panpot:
OFF
• Expression:
OFF
DEVICE ID:
1
MTC
• Sync source: Internal
• Sync out:
OFF
• MTC type:
30
• MTC Error level: 5
MMC Mode
RS-232C Setting
s
Data transmission speed setting:
9600
AR-LINK Setting
AR-LINK Mode
:
OFF
System setting
s
Dual MONO Mode:
OFF(Stereo)
Line thru setting
• Line thru select: ON
• Line thru volume level: 0
• Fade out:
0.05
• Fade in:
0.05
EQ
• Switch:
OFF
Volume thru:
OFf
Busy out
• Delay time:
ON
• Phrase playback: ON
• Repeat playback: OFF
• Display Extinguished:
OFF
ETC. settings
Recording phrase:
250
AR-3000 settings that can be
used
The following AR-3000 settings can be used by the AR-200.
Refer to this list if you will be using a card created by the AR-
3000.
Settings Data
With the Card
With the AR-200
Setting
Setting
Recording Settings
x
o
Phrase settings(*1)
o
o (*2)
Direct playback setting
o
o (*4)
Program Playback Settings
o
x
Binary Playback Settings
o (*3)
o (*3)
Terminal Rec Settings
o
o (*5)
Dual Mono Mode Settings
o
x
MIDI notes setting
o
x
MIDI receive channel setting
o
o
MIDI note trigger
o
x
MIDI Device ID setting
o
x
Recording phrase
o
o
(*1)
The phrase name will not be displayed on the AR-200.
(*2)
Repeat playback setting of phrase settings will be
ignored at Interval Playback.
(*3)
For binary playback, up to 250 phrases can be played
back.
(
*4
)
With Direct Playback, only Reverse Priority is
available.
(*5)
Only Binary Recording (equivalent to Terminal Rec
Binary2) is possible.
AR-200_e.book 55 ページ ２００３年７月１４日 月曜日 午後１時１１分