Ricoh SAVIN A741 - Manual (Page 46)

A741 38 Print Server Manual
9.2 Which items are included in the A741 Repro System PC?
The following items are contained in the basic A741 Repro System.).
A fully configured PC (chapter 8.2) is required as well as:
•
PCI interface card
This card provides the physical interface between the PC and the A741. It
uses a proprietary interface with both parallel and serial data signals for
the communication. Only this interface can be used to communicate with
the A741.
•
A741 Repro System software
A CD-ROM containing all the required drivers, the server and client
programs, tools and diagnostics.
•
Cables
A set of cables to connect the A741 to the Print Server PC.
9.3 Can I use any existing A741 in combination with the A741 Repro
System Print Server?
Yes, any existing A741 can be used. The only consideration might be that the
EPROM level must be checked to ensure proper installation and operation of the
A741 Repro System.