St2s operation, Uno-lrc1 remote control with cav6.6 – Russound ST2S User Manual

Page 26

UNO-LRC1 Remote Control Operation

Turning the unit on

The tuner is power managed by the CAV6.6 or other
RNET-enabled controller. If the tuner is in standby
mode, any button press of the UNO-LRC1 will bring
the tuner out of standby mode when used with the
UNO keypad.

Selecting the desired tuner

To select a tuner, push

and choose the source

number preassigned to Tuner 1 (SIRIUS) or Tuner 2

(AM/FM), or use the UNO numeric source inputs at

the bottom of the UNO-LRC1.

Selecting the desired band (AM/FM only)

Push

to toggle between AM/FM reception.

Selecting a Mode (SIRIUS)

Push

to toggle between SIR-

IUS operating modes.

Exiting a Mode (SIRIUS)

Press

to exit SIRIUS operating mode

menu.

Signal Strength mode (SIRIUS)

Press and hold

and release. The display shows

the signal strength rating. To exit press

Selecting the desired frequency or channel

Use the Channel

and

for manual tuning. To move quickly through the

channels, press and hold the button for more than

1.5 seconds. To directly select a station or channel,

enter the three- or four-digit channel or frequency

Frequency Seek (AM/FM only)

The SEEK function is performed by pressing and

releasing the Select

. To seek

higher frequency station press

. Press

for

lower frequencies. Tuning begins at the current fre-

quency, seeks upward (or downward) and stops at the

next tuned station. Pushing

again con-

tinues the SEEK function. Once the highest frequency

is reached, the tuner continues SEEK mode at the

lowest frequency.

Frequency Scan (AM/FM only)

To scan, press and hold then release

. The

tuner scans through tuned stations with a 5-second

preview before moving to the next station. To end

scanning, press

again.

Selecting a Bank

To select a bank, press and hold

for bank up

for bank down.

Recalling a Memory Preset

Press and or and to

scroll

through a loop of all the memory presets for the cur-

rently selected bank. Only configured presets will be

displayed.

Mute

Press the

button to mute/unmute the tuner

audio output.

ST2S OPERATION

UNO-LRC1 REMOTE CONTROL WITH CAV6.6