Russound ST2S - Manual (Page 11)

ST2S SETUP AND CONNECTIONS
CAV6.6 SERIES CONNECTIONS
L R
RNET Link RS232 Interface 1 Keypad 2
FM Coax
75 Ω
Loop Antenna
GND AM
Tuner 2
IR L R
Power 12VDC 1.25A
Serial
Tuner 1
IR
ST2 Smart Tuner
Designed in USA
Made in China In Out
ST2 Tuner
CAV6.6
UNO-S2
keypads
RCA Cable
99:Horizons
Sirius antenna
Tuner 1 is Source 1
Tuner 2 is Source 2
RCA Cables
AM loop antenna
Source Connections with CAV6.6 Controller/Amplifier (RNET System)
The diagram depicts a typical setup using the ST2S Tuner with a CAV6.6 amplifier. Each tuner in the
ST2 unit must be connected as a separate source for audio inputs. UNO-S2 keypads are connected
to the CAV6.6 keypad ports, NOT the ports on the ST2 Tuner.
NOTE: When viewed from the BACK, Tuner 1 output is on the RIGHT side of the ST2S, and the
Tuner 1 (Source 1) input is on the LEFT side of the source input section of the CAV6.6.
11