Program user color, Adjusting colors based on the selected color, 3program user color – Ricoh 4506 User Manual
Page 123
Program User Color
111
3
Program User Color
In addition to the base colors, you can store up to 15 customized colors into
memory (User Color).
Reference
For color samples
If your machine has an option, you can sample the user color.
pling the User Color (Option)”.
Note
❒ There are two ways to make user colors as follows:
• Adjusting a selected base color
• Mixing colors manually with number keys
❒ Up to 15 colors can be stored.
❒ The total percentages of the mixed colors must be 255% or less.
❒ If the total percentage of the mixed color is over 255%, the copier cannot cre-
ate the color properly and the results will appear different.
❒ If the total percentage of the mixed colors is too low, toner may not bond to
the paper properly resulting in a change in image density.
❒ The appearance of user colors might vary slightly according to the image type
you have selected (Photo, Text, etc.).
Adjusting Colors Based on the Selected Color
A
Press the
{{{{Adjustment}}}} key.
B
Press the [Prog. User Color] key.
Zcms022n.eps