Runco CL-610LT - Manual (Page 16)

16 Runco CL-610 Owner’s Operating Manual
Controls and Functions
FOCUS LENS ZOOM
LIGHT
OFF ON
VID S-VID COMP1
RGBHD
INFO RVR
ENTER
EXIT MENU
BRT CONT COL TNT
HDMI
COMP2
MEM1 FACT ISF
DAY
ISF
NIGHT
ANA
16X9
VWIDE LBOX 4X3
CINEMA VCINE
PBP PIP PIP+ ACT
PIP-
2 1
5 4 6 3
9 8 0 7
CINEMA
Image in Letterbox mode is
enlarged to a 16x9 image
and the upper and lower
portions are compressed.
ANA (Anamorphic)
For 16:9 DVDs.
4X3 (Standard 4:3)
The input signal will be
scaled to fit 4:3 display mode
in the center of the screen.
LBOX (Letterbox)
Image in letterbox format is
enlarged to fit 16:9 full screen
display and the upper/ lower
portions are “blanked off.”
VWIDE (VirtualWide)
4:3 image is enlarged NON-
linearly in horizontal direction
to fit 16:9 full screen display.
VCINE (Virtual Cinema)
A 2.35 image is stretched
vertically in both directions to
fill a 16:9 image.
MEM1, ISF NIGHT, ISF
DAY, FACT
Recall video memory
sequentially. See “Selecting
Video Memory” on page 28.
PBP (Picture by Picture)
Enable the PBP function.
ACT (Active)
Switch to the active window
in PIP display mode.
PIP (Picture in Picture)
Enable the PIP function. Use
ARROW keys to adjust the
position of the PIP window.
See “PIP / PBP Function” on
page 29.
PIP+
Enlarge the size of PIP
window.
PIP-
Shrink the size of PIP
window.
0 - 9
Press to type in menu
passcodes.
Remote Control
(continued)