RCA UND RECEIVER RTD250 - Manual (Page 16)

Operating Your Receiver
EN
13
Switching on /off
• To switch on the receiver, press the ON/STANDBY but-
ton on the receiver once to enter standby mode. Press the
SOURCE button on the receiver or one of the source but-
tons or ON/OFF button on the remote control to power on
the receiver.
• Standby: when the receiver is on, press the ON/OFF on
the remote or the ON/STANDBY button on the receiver to
return to standby mode.
Selection of Audio/Video source
When one of the audio/video source is selected, the audio
and video input corresponding to the name will be
activated.
The receiver acts as a switching device between all the
sources that are plugged into it.
Example 1:
If you connect a VCR player to the VCR input (audio +
video) on the receiver and press the SOURCE button
until VCR shows on the display. You will be able to have
the sound and image transmitted by the VCR.
NOTE
Your receiver has a 2-week back up memory to
avoid losing settings such as preset radio stations in
case of power outage. If the receiver is unplugged
for more than 2 weeks, all the settings will be lost
and re-setting will be necessary.
ON/STANDBY
5
D
ESSIVE
N
SOUND MODE SOURCE
VOLUME
SOUND MODE SOURCE
VOLUME
SOUND MODE SOURCE
VOLUME
RTD250-EN receiver 10/30/03 10:09 AM Page 17