RIDGID TP1300 - Manual (Page 4)

4
Safety Instructions for Thickness Planer (continued)
• Find and Read the following labels on the thickness planer:
When Installing Or Moving The Thickness Planer
• Before moving the thickness planer,
turn off and unplug the power cord.
• To reduce the risk of back injury, get
help when you need to lift the thick-
ness planer.
Avoid Dangerous Environment.
• Use the thickness planer in a dry,
indoor place protected from rain.
• Keep work area well lighted.
• Place the thickness planer so neither
the user nor bystanders are forced to
stand in line with the wood. Thrown
debris could injure people in its path.
• Place the thickness planer where there
is room for moving the workpiece
through the entire cut.
To reduce the risk of injury from
unexpected thickness planer
movement:
• Put the thickness planer on a firm
level surface where there is plenty
of room for handling and properly
supporting the workpiece.
• Support the thickness planer so the
tables are level and the thickness
planer does not rock.
• Bolt or clamp the thickness planer to
the table/bench if it tends to slip,
walk, slide or tip over during work
such as planing long, heavy boards.
• Never Stand On Tool. Serious
injury could occur if the tool tips or
you accidentally hit the cutting tool.
Do not store anything above or near
the tool where anyone might stand
on the tool to reach them.
To reduce the risk of injury or
death from electrical shock:
Make sure your fingers do not touch
the plug’s metal prongs when plug-
ging or unplugging the thickness
planer.