Operating procedures – Ryobi 310r User Manual

Page 11

WARNING

DO NOT OPEN THE DOOR WITH THE
ENGINE RUNNING! To do so can result in
serious personal injury caused by contact with
the rotating blades.

NOTE:

Do not wear rubber or any other insulated
gloves to avoid static electricity shock.

1. Move the unit slowly back and forth over the debris

to be vacuumed (Fig. 22).

WARNING

Wear goggles or safety glasses at all times when
operating this unit.

TYPICAL OPERATING POSITIONS

Use the blower for trees, shrubs, flower beds and
hard-to-clean areas (Fig. 19).

OPERATING PROCEDURES

2. Use the unit around buildings and for other normal

cleaning (Fig. 20).

3. Use the blower for walls, overhangs and screens

(Fig. 21).

Fig. 20

Fig. 21

VACUUM OPERATING PROCEDURES -
(OPTIONAL FOR MODEL 310r)

Fig. 22

Fig. 19

2. Vacuum a large pile of debris working from the out-

side of the pile. Do not force the suction tube into the
debris because this can clog the tube.

3. Empty the collection bag after each use. Shake the

bag vigorously while emptying to remove dust from
the bag, which can block the proper amount of air
flow and deteriorate the performance of the vacuum.

NOTE: Use the zipper when emptying the

collection bag. Do not empty the bag
through the nozzle.