Regency Bellavista Gas Fireplace B36X - Manual (Page 26)

26
Regency Bellavista™ B36X Gas Fireplace
INSTALLATION
Pipe Length
Vertical
Termination
Cap
Storm Collar
Flashing
Ceiling Firestop
Rigid Pipe Adaptor
Pipe
Length
Pipe Length
90 Elbow o
Astrocap
(946-523/P)
Wall Thimble
Vinyl Siding
Standoff (Optional)
Reducer
(4” x 6-5/8” venting) 43”
(1092 mm)
RIGID PIPE VENTING SYSTEMS
Horizontal or Vertical Terminations
The minimum components required for a basic horizontal termination using 4" x 6-5/8" are:
1 Rigid Pipe Adaptor
1 Reducer
1 90
o Elbow
1 Wall Thimble
1 Length of pipe to suit wall thickness
1 Horizontal Termination Cap
Wall thickness is measured from the back standoffs to the inside mounting surface of termination cap. For siding other than vinyl furring strips may
be used, instead of the vinyl siding standoff, to create a level surface to mount the vent terminal. The Terminal must not be recessed into siding.
Measure the wall thickness including furring strips.
If a Vinyl Siding Standoff is required (it must be used with vinyl siding), measure to outside surface of wall without siding and add 2 inches.
The FPI AstroCap TM and FPI Riser Vent terminal are certifi ed for installations using FPI venting systems as well as Simpson Dura-Vent ® Direct Vent,
American Metal Products, Security Secure Vent ® , AmeriVent Direct Vent. AstroCap TM is the proprietary trademark of FPI Fireplace Products International
Ltd. Dura-Vent® and Direct Vent are registered and/or proprietary trademarks of Simpson Dura-Vent Co. Inc.
This product has been evaluated by Intertek for
using a Rigid Pipe Adaptor in conjunction with
DuraVent Direct Vent, Selkirk Direct-Temp, Ameri
Vent Direct venting and Security Secure Vent
systems. Use of these systems with the Rigid
Pipe Adaptor is deemed acceptable and does not
affect the Intertek WHI listing of components.
WARNING:
Do not combine venting components from
different venting systems.
Exception: However, use of the AstroCap TM and
FPI Riser is acceptable with all systems.
A
B 11”
(279mm)
11”
(279mm)
ASTROCAP # 946-523/P
DIMENSIONS