Regency Bellavista Gas Fireplace B36X - Manual (Page 13)

Regency Bellavista™ B36X Gas Fireplace
13
INSTALLATION
FINISHING
Diagram 2
Diagram 1
IMPORTANT FINISHING DETAIL NOTE:
Before placing unit into fi nal position - it is important to know the total
thickness / height of fi nished hearth (tile, carpet, etc.) The base of the
fi replace should be level or higher than the fi nished hearth height.
Diagram 3
Finishing material - thicker
than 1-1/4"
Diagram 4
Full Screen
Door
Important:
Finishing materials such as tile, river rock, etc, must not protrude
beyond the front facing fl anges the sides and top of the fi rebox
opening.
Full Screen Doors Only:
If
fi nishing with any material thicker than 1-1/4" - a 3/4" gap must
be maintained between the full screen doors and the fi nishing
material.
This gap is necessary to facilitate the installation and removal of the
full screen doors.
Note: All facing material should butt up cleanly to the fl anges
around the fi rebox opening.
Rough edges will be visible from the front view with the fl ush louvers or
fl ush panels - if not using the fi nishing trim.
To maintain a clean fi nished edge - it is recommended to install the
drywall or other facing material with the fi nished edge against the
fi replace / nailing strips.
Alternatively, you can use J Style Trim or Metal Corner Bead
to cover cut edges of the facing material.
3/4"