Roland Fantom-S - Manual (Page 177)

177
Adding Effects
Adding Effects
MFX Output Level
(Multi-Effects Output Level)
Adjusts the volume of the sound that has passed through the multi-
effects.
Value: 0–127
MFX Chorus Send Level
(Multi-Effects Chorus Send Level)
Adjusts the amount of chorus for the sound that passes through
multi-effects. If you don’t want to add the Chorus effect, set it to “0.”
Value: 0–127
MFX Reverb Send Level
(Multi-Effects Reverb Send Level)
Adjusts the amount of reverb for the sound that passes through
multi-effects. If you don’t want to add the Reverb effect, set it to “0.”
Value: 0–127
MFX Output Assign
(Multi-Effects Output Assign)
Adjusts the output destination of the sound that has passed through
the multi-effects.
Value
A: Output to the OUTPUT A (MIX) jacks in stereo.
B: Output to the OUTPUT B jacks in stereo.
If the Mix/Parallel parameter is set to “MIX,” all sounds are
output from the OUTPUT A (MIX) jacks in stereo (p. 193).
Chorus Type
Selects either chorus or delay.
Value
0 (Off): Neither chorus or delay is used.
1 (Chorus): Chorus is used.
2 (Delay): Delay is used.
3 (GM2 Chorus): General MIDI 2 chorus
Chorus Output Select
Specifies how the sound routed through chorus will be output.
Value
MAIN: Output to the OUTPUT jacks in stereo.
REV: Output to reverb in mono.
M+R: Output to the OUTPUT jacks in stereo, and to reverb in mono.
When set to “MAIN” or “M+R,” the OUTPUT jack from which
the sound is output is set in Chorus Output Assign (
).
Chorus Level
Adjusts the volume of the sound that has passed through chorus.
Value: 0–127
Chorus Output Assign
Selects the pair of OUTPUT jacks to which the chorus sound is
routed when Chorus Output Select (
) is set to “MAIN” or “M+R.”
Value
A: Output to the OUTPUT A (MIX) jacks in stereo.
B: Output to the OUTPUT B jacks in stereo.
When Chorus Output Select ( ) is set to “REV,” this setting
will have no effect.
Reverb Type
Selects the type of reverb.
Value
0 (Off): Reverb is not used.
1 (Reverb): Normal reverb
2 (SRV Room): This reverb simulates typical room acoustic
reflections.
3 (SRV Hall): This reverb simulates typical concert hall acoustic
reflections.
4 (SRV Plate): This reverb simulates a reverb plate, a popular
type of artificial reverb unit that derives its sound
from the vibration of a metallic plate. You can also
achieve unusual metallic-sounding reverbs using
“SRV Plate.”
5 (GM2 Reverb): General MIDI 2 reverb
Reverb Level
Adjusts the volume of the sound that has passed through reverb.
Value: 0–127
Reverb Output Assign
Specifies how the sound routed through reverb will be output.
Value
A: Output to the OUTPUT A (MIX) jacks in stereo.
B: Output to the OUTPUT B jacks in stereo.
If the Mix/Parallel parameter is set to “MIX,” all sounds are
output from the OUTPUT A (MIX) jacks in stereo (p. 193).
Chorus Source
Selects chorus parameter settings. If you want to use the settings of
the patch or rhythm set assigned to the Keyboard part, select “KBD.”
If you want to use the settings of the patch or rhythm set assigned to
the Pad part, select “PAD.”
Value: KBD, PAD
Reverb Source
Selects reverb parameter settings. If you want to use the settings of
the patch or rhythm set assigned to the Keyboard part, select “KBD.”
If you want to use the settings of the patch or rhythm set assigned to
the Pad part, select “PAD.”
Value: KBD, PAD
8
9
10
11
12
13
15
14
15
13
13
16
17
18
19
20
Reference_e.book 177 ページ ２００３年７月１４日 月曜日 午後３時２５分