RCA VR616HF - Manual (Page 56)

54
connections
TV with audio/video jacks and satellite
receiver
This connection assumes:
• You have an advanced satellite system.
• Your TV has audio/video input jacks.
This connection provides:
• Stereo sound playback from VCR.
• Recording from receiver while watching cable or off-air channel.
• Recording one cable or off-air channel while watching another.
To use this connection, you must have:
• (3) coaxial cables, and (6) audio/video cables
To connect:
1. Connect cables as shown.
2. Return to the First Things First, then follow the steps.
Using This Connection
• Tune your TV to its video input to record (or watch) the VCR
or satellite receiver.
• To record from the satellite receiver, tune your VCR to its line
input (“L1” appears in display).
Auto TV/VCR Setting:
• Set the Auto TV/VCR feature to OFF. Use of TV•VCR button is
not required.
To play a tape:
1. Insert a tape.
2. If necessary, press VCR and then PLAY.
To record one off-air or cable program and watch another:
1. Begin recording a program using a recording feature.
2. Select a different channel on the TV.
To record a satellite receiver program and watch a cable or off-
air channel:
1. Turn on the satellite receiver, tune the VCR to its line input
(L1), and begin recording a program using a recording
feature.
2. Select a different channel on the TV.
VCR
TV
SATELLITE SIGNAL
CABLE OR ANTENNA
CH 3 4
IN
FROM
ANTENNA
OUT
TO
TELEVISION
MONO
L L
R R
IN OUT
IN OUT
VIDEO
AUDIO
CABLE/
ANTENNA
SATELLITE RECEIVER
IN FROM ANT
OUT TO TV CH3
CH4
SATELLITE
IN
S-VIDEO
L R AUDIO VIDEO
INPUT 1
VIDEO
R
L/MONO
S-VIDEO
AUDIO
OUTPUT
R
L
INPUT 2
VIDEO R
L/MONO