RCA VR616HF - Manual (Page 31)

29
RECORDING
3. If your VCR viewing channel is 3 or 4, make sure the VCR
indicator appears in the VCR’s display panel. If not, press
TV•VCR to turn it on.
4. Use the SPEED button on the remote to select a
recording speed.
5. Select the channel or line input to be recorded.
6. Set the Reception: STEREO/MONO/SAP feature for the type of
audio you want to record. See Other Features section.
AUDIO
1 Reception: STEREO
2 Tape Playback: HI-FI
0 Exit
7. Press RECORD (REC) to start recording.
8. Press STOP when you are finished.
Recording Audio Only
You can record audio only from another audio source connected
to the AUDIO IN (MONO L and R) jacks on the back or front of
the VCR.
1. Press the INPUT button on the remote to select the line input.
“L1” or “L2” will appear in the display.
Select “L1” to record audio from the audio equipment
connected to the AUDIO IN jacks on the back of the VCR or
“L2” to record from the jacks on the front of the VCR.
2. Use SPEED on the remote to select the recording speed.
3. Start audio source playing and press RECORD (REC) to
begin recording.
4. Press STOP when you are finished.
Playing Back Audio Only
To get stereo sound, connect the AUDIO OUT jacks of the VCR to
the appropriate input on your amplifier or receiver. Do not use
the phono input. Refer to your amplifier or receiver user’s guide.
CH 3 4
IN
FROM
ANTENNA
OUT
TO
TELEVISION
MONO
L L
R R
IN OUT
IN OUT
VIDEO
AUDIO
VCR
AMPLIFIER / RECEIVER
PHONO TUNER TAPE
OUT IN
AUX
LEFT
RIGHT
Audio Connection