RIDGID EB44241 - Manual (Page 9)

9
hex key
storaGe
area
sandinG belt
assembly
dust
exhaust
Port
PRODUCT SPECIFICATIONS
Motor ...................................................... 3/8 HP Induction
Phase ....................................................................... Single
Rotation of Shaft ...............................................Clockwise
No Load Speed ................................. 0-175/rpm/spindle
No Load Speed .......................................0-1350/rpm/belt
Oscillation ..............................................................60/min.
FEATURES
Stroke ...................................................................... 3/4 in.
Sanding Sleeves ......... 1/ in., 3/4 in., 1 in., 1-1/ in., in.
Sanding Drums ....................... 3/4 in., 1 in., 1-1/ in., in.
Sanding Belt ...................................................4 in. x 4 in.
Input .............................. 10 V, 60 Hz, AC only, 5.0 Amps
Net Weight .............................................................. 40 lbs.
REMOVE
aaaa
switCh
sPindle knob
sandinG
sleeve
sandinG sleeves /
throat Plates /
washer storaGe area
uPPer sPindle
washer
throat Plate
table
insert
table
loCk
knob
slots for
saw horse
mountinG
REMOVE
sandinG belt
work rest
belt
tension
lever
table insert / sandinG
belt storaGe
worktable
traCkinG knob
Fig.