Radio Shack TAD-1028 - Manual (Page 14)

14
TELEPHONE OPERATION
Make and answer phone calls on the
TAD-1028 as you would with any other
phone. Read this section to learn about
the phone’s special features.
SETTING THE HANDSET
VOLUME
The handset’s volume control lets you
adjust the sound you hear through the
handset.
To increase or decrease the volume,
roll the handset’s volume control up or
down.
USING REDIAL
You can quickly dial the last number di-
aled. When you hear a dial tone, simply
press
REDIAL .
Note: The redial memory holds up to 31
tone digits or 32 pulse digits, so you can
redial long distance as well as local
numbers.
USING RESET
To disconnect a call without hanging up
the phone, simply hold down
RESET for
about 1 second. When you release it
and hear a dial tone, dial again.
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank-
by-phone, require tone signals. If you
have pulse service, you can still use
these special tone services by following
these steps.
1. With TONE/PULSE set to PULSE ,
dial the service’s main number.
2. When the service answers, set
TONE/PULSE to TONE . Any addi-
tional numbers you dial are sent as
tone signals.
3. After you complete the call, set
TONE/PULSE back to PULSE and
hang up the phone.
Illus. showing
the handset volume
control.
Illus. showing
the REDIAL button.
Illus. showing
RESET button.
43-788.fm Page 14 Monday, August 16, 1999 8:19 AM