Radio Shack TAD-1028 - Manual (Page 13)

13
2. To change the day of the week,
repeatedly press OGM/REPEAT to
move backward or PLAY/SKIP to
move forward to the desired day of
the week.
3. Press ANSWER/STOP/DELETE . The
TAD-1028 beeps once and
announces the hour and “AM” or
“PM.”
4. To change the hour, repeatedly
press OGM/REPEAT to move back-
ward or PLAY/SKIP to move forward
to the desired hour.
5. Press ANSWER/STOP/DELETE . The
TAD-1028 beeps once and an-
nounces the minutes.
6. To change the minutes, repeatedly
press OGM/REPEAT to move back-
ward or PLAY/SKIP to move forward
to the desired minute.
Note: You can hold down OGM/
REPEAT or PLAY/SKIP to move the
minutes in 10-minute increments.
7. When you finish, press ANSWER/
STOP/DELETE . The TAD-1028
beeps and announces the day and
time.
To check the current day/time at any
time, use a straightened paper clip to
press
CLOCK .
SETTING THE RINGER’S
VOLUME
To adjust the ringer’s volume, set OFF/
LO/HI to HI for a noisy room (such as a
kitchen), or LO for a quiet room (such as
a bedroom).
If you do not want to be disturbed by a
ringing phone, set the switch to
OFF .
This telephone does not ring, but you
can make outgoing calls. And, if you
hear an extension phone ringing, you
can answer incoming calls with this
phone.
Illus. showing
OGM/REPEAT
and PLAY/SKIP.
Illus. showing ANSWER/
STOP/DELETE.
Illus. showing
RINGER switch.
43-788.fm Page 13 Monday, August 16, 1999 8:19 AM